Support
Regulation 18 draft Local Plan
Representation ID: 4671
Received: 07/12/2023
Respondent: Mrs Elizabeth Field
This policy on housing density would be well served by a site put forward at The Spinney, off Rogues Lane on the outskirts of Cottesmore. For some reason it has not been put forward but could be an ideal contender:
*only for a relatively small number of houses
*on a quiet road only leading up to Kendrew Barracks
*in a quiet and secluded position, surrounded by trees, shrubbery and on one side village cemetery
This site was well supported when first put forward in Neighbourhood Plan. Surely it deserves looking at again. It fulfils many criteria for our village’s future.
Support noted.
Object
Regulation 18 draft Local Plan
Representation ID: 4741
Received: 12/12/2023
Respondent: Miss Serena Solanki
The housing density impacts the development plan and should be reassessed. The housing density leads to sprawling development sites rather than concentrating population in already developed areas with local public transport and employment opportunities. The housing plans also do not lend themselves well to young people who mainly live alone and would prefer to live in flats. The local plan doesn't lend itself well to promoting the local character of the county through building new through roads to service these new dwelling sites and would damage the local environment
Comments noted. NPPF recommends the use of minimum density standards in policies and suggests that a range of densities may be appropriate to reflect different local circumstances. The policy is written to allow flexibility to reflect local circumstances and existing development patterns whilst ensuring that a minimum density is established.
Object
Regulation 18 draft Local Plan
Representation ID: 4835
Received: 20/12/2023
Respondent: Miss helen gillies
The facilities in Stamford eg GP surgeries and dentists are too full to offer a satisfactory service now without adding 650 households - also they are all across town so this will add to the traffic travelling through roads that are already not suitable for a lot of traffic
Comments noted
Support
Regulation 18 draft Local Plan
Representation ID: 5169
Received: 03/01/2024
Respondent: Mr Frank Brett
From an environmental point of view I have to agree that most effective use of land is preferred.
Support noted.
Object
Regulation 18 draft Local Plan
Representation ID: 5272
Received: 03/01/2024
Respondent: Mary Cade
Housing density should be very much determined by location, and the housing mix proposed. It is important that homes are not crammed together leaving little space for gardens and communal green areas which could be opportunities for Biodiversity Net Gain and Green/Blue Corridors etc
Comments noted. NPPF recommends the use of minimum density standards in policies and suggests that a range of densities may be appropriate to reflect different local circumstances. The policy is written to allow flexibility to reflect local circumstances and existing development patterns whilst ensuring that a minimum density is established.
Support
Regulation 18 draft Local Plan
Representation ID: 5338
Received: 04/01/2024
Respondent: Mrs Mary Cate
We need to ensure best use of land available
Support noted.
Object
Regulation 18 draft Local Plan
Representation ID: 5644
Received: 05/01/2024
Respondent: Ashwell Parish Council
A blanket minimum of 25 properties per hectare is unrealistic if you are true to other environmental, health and traffic aims: Each property will require parking for 1 or 2 vehicles and access roads will need to be wider if they are to be lined by trees and useable pedestrian pavements. Space will also be at a premium as a result of the orientation of individual properties with regard to the effective positioning of solar panels and appropriate storage for bins.
Comments noted. NPPF recommends the use of minimum density standards in policies and suggests that a range of densities may be appropriate to reflect different local circumstances. The policy is written to allow flexibility to reflect local circumstances and existing development patterns whilst ensuring that a minimum density is established.
Object
Regulation 18 draft Local Plan
Representation ID: 6409
Received: 08/01/2024
Respondent: Little Casterton Parish Council
There is much in this Local Plan that needs complete rethinking as it appears the only objective is to meet a housing quota by dumping the proposal on a local community area that cannot support it, as such we cannot support this aspect of the plan.
Comments noted
Object
Regulation 18 draft Local Plan
Representation ID: 6464
Received: 08/01/2024
Respondent: Manton Parish Council
We are concerned that adopting a minimum of 25 dph as a rule will cause inappropriate numbers of dwellings in some rural areas.
Comments noted. NPPF recommends the use of minimum density standards in policies and suggests that a range of densities may be appropriate to reflect different local circumstances. The policy is written to allow flexibility to reflect local circumstances and existing development patterns whilst ensuring that a minimum density is established.
Object
Regulation 18 draft Local Plan
Representation ID: 6501
Received: 08/01/2024
Respondent: Mr Andrew Nebel
The nature of housing most needed in the county is small, affordable starter homes. This requires a greater density. There is already a preponderance of large, detached homes proposed and the plan needs to ensure over 50% of all future developments contain small, affordable starter homes. 'Affordability' must not be calculated as a quotient of the county's existing housing stock's price averages which are much higher relative to the national average. It should be linked to average wages in this area and the cost of mortgages in order to be truly and justifiably 'affordable'.
Comments noted. The policy is written to provide a degree of flexibility to reflect local circumstances and existing development patterns, in accordance with nation policy advice.
Object
Regulation 18 draft Local Plan
Representation ID: 6593
Received: 08/01/2024
Respondent: Defence Infrastructure Organisation (DIO)
Agent: Montagu Evans LLP
Comments made on behalf of the DIO as part of a full written response to Rutland Council. Representations should be read in context and not in isolation.
The DIO wish to highlight that there is currently a difference between the minimum density specified in draft Policy H3 of 25 dwellings per hectare, and the density used for the site capacity exercise at emerging Policy H1 – which uses 30 dwellings per hectare. The Council should ensure that there is a robust and consistent approach within the Local Plan.
Comments noted. NPPF recommends the use of minimum density standards in policies and suggests that a range of densities may be appropriate to reflect different local circumstances.
the Core Strategy sets a minimum of 30 for the villages and 40 for the towns. Monitoring suggests that this has not always been achieved and therefore the policy has been written to allow flexibility to reflect local circumstances and existing development patterns whilst ensuring that a minimum density is established.
The indicative capacity of allocated sites is based upon 30 dph as these sites have been assessed as being suitable for development and free from constraints which may reduce the capacity.
Object
Regulation 18 draft Local Plan
Representation ID: 7179
Received: 08/01/2024
Respondent: Persimmon Homes East Midlands
The number of dwellings per hectare (dph) should be increased to generally no less than 30 dph. The 30 dph figure is used in this Draft Local Plan to calculate likely numbers of dwellings for housing allocations in this draft plan.
Wording within the policy still allows for flexibility in its application, however the 30 dwellings per hectare provides a useful starting point in ensuring land is developed in an effective manner as possible whilst ensuring the character of settlements is maintained.
Conversely if this figure is not increased to 30 dwellings per hectare, allocations would need to be calculated on the basis of 25 dph and this would have a knock on impact for the number of sites which need to be allocated.
Comments noted. NPPF recommends the use of minimum density standards in policies and suggests that a range of densities may be appropriate to reflect different local circumstances.
the Core Strategy sets a minimum of 30 for the villages and 40 for the towns. Monitoring suggests that this has not always been achieved and therefore the policy has been written to allow flexibility to reflect local circumstances and existing development patterns whilst ensuring that a minimum density is established.
The indicative capacity of allocated sites is based upon 30 dph as these sites have been assessed as being suitable for development and free from constraints which may reduce the capacity.
Object
Regulation 18 draft Local Plan
Representation ID: 7240
Received: 08/01/2024
Respondent: Taylor Wimpey Straetgic Land
Agent: Bidwells
Draft policy H3 indicates a minimum density of 25 dph on all sites, recognising the need to consider local character and distinctiveness.
Whilst Taylor Wimpey have no fundamental issue with setting a minimum density, we suggest it may be beneficial to link the policy back to the indicative site capacities set out in policy H1 to avoid the perception by some readers that 25 dwellings per hectare would be an appropriate density for all sites.
Comments noted. NPPF recommends the use of minimum density standards in policies and suggests that a range of densities may be appropriate to reflect different local circumstances.
the Core Strategy sets a minimum of 30 for the villages and 40 for the towns. Monitoring suggests that this has not always been achieved and therefore the policy has been written to allow flexibility to reflect local circumstances and existing development patterns whilst ensuring that a minimum density is established.
The indicative capacity of allocated sites is based upon 30 dph as these sites have been assessed as being suitable for development and free from constraints which may reduce the capacity.
Support
Regulation 18 draft Local Plan
Representation ID: 7302
Received: 08/01/2024
Respondent: Manor Oak Homes
Agent: Mr Andy Moffat
The approach responding to local character, context, and distinctiveness and indicating a general minimum of 25 dph is supported over a more prescriptive approach.
Support noted.
Support
Regulation 18 draft Local Plan
Representation ID: 7359
Received: 08/01/2024
Respondent: The Society of Merchant Venturers
Agent: Savills
Policy H3 broadly aligns with the NPPF in the requirement to achieve appropriate densities by making ‘efficient use of land’. The policy confirms that ‘Residential densities will vary dependent upon the local area context and character and the sustainability of the location, but generally should be no less than 25 dph (dwellings per hectare).
Indeed, it will be important that residential development densities are established through detailed design
and the planning application process, rather than be prescribed through policy, in order to enable densities
to be considered on a site-by-site basis. The fact that this policy sets out a minimum density figure and does not include a maximum density figure is broadly supported and aligns with the provisions of the NPPF.
Support noted.
Support
Regulation 18 draft Local Plan
Representation ID: 7794
Received: 08/01/2024
Respondent: Edith Weston Parish Council
We note the content of Policy H3. However, it appears not to have been considered by policy SS5 and H1.4
In general, we support policies relating to housing mix, accessibility, and self-build. However, we feel that more emphasis is needed on the regeneration of existing housing – for example, the space above shops in Oakham and Uppingham and regeneration and investment into town centres in general, as we are concerned about the perceived decline of our High Street in Oakham with many shops/ facilities closing.
Support noted.
Support
Regulation 18 draft Local Plan
Representation ID: 7912
Received: 08/01/2024
Respondent: Ryhall Parish Council
H3 Housing Density - Support
Support noted.